| Acrylonitrile Butadiene Styrene (ABS) Typical Properties |
Share This Page
• Free Access to 80,000 Datasheets
|
|
|
-
-
-
|
English
|
| Density (g/cm³) | 1.03 to 1.11 | 1.04 to 1.09 | 1.07 to 1.37 | 1.10 to 1.21 | | Melt Mass Flow Rate (g/10 min) | 0.20 to 26 | 2.5 to 36 | 7.0 to 80 | 0.20 to 30 | | Flexural Modulus (psi) | 239000 to 450000 | 144000 to 326000 | 214000 to 394000 | 230000 to 401000 | | Tensile Strength (psi) | 5.50 to 16400 | 4210 to 7440 | 4530 to 7110 | 3050 to 14000 | | Tensile Elongation (%) | 0.0 to 56 | 3.0 to 210 | 3.3 to 100 | 2.0 to 100 | | Rockwell Hardness | 94 to 116 | 90 to 110 | 104 to 117 | 109 to 120 | | Notched Izod Impact (ft·lb/in) | 0.131 to 9.49 | 1.00 to 16.2 | 0.562 to 11.3 | 0.468 to 13.1 | | DTUL @ 66 psi (0.45 MPa) (°F) | 170 to 222 | 171 to 215 | 206 to 303 | 194 to 269 | | DTUL @ 264 psi (1.8 MPa) (°F) | 165 to 210 | 142 to 196 | 162 to 196 | 172 to 249 | | CLTE, Flow (in/in/°F) | 4.4E-6 to 0.11 | 0.000055 to 0.011 | 0.000055 to 0.000057 | 4.4E-6 to 8400 |
SI
|
| Density (g/cm³) | 1.03 to 1.11 | 1.04 to 1.09 | 1.07 to 1.37 | 1.10 to 1.21 | | Melt Mass Flow Rate (g/10 min) | 0.20 to 26 | 2.5 to 36 | 7.0 to 80 | 0.20 to 30 | | Flexural Modulus (MPa) | 1650 to 3100 | 994 to 2250 | 1480 to 2710 | 1590 to 2760 | | Tensile Strength (MPa) | 0.0379 to 113 | 29.0 to 51.3 | 31.2 to 49.0 | 21.0 to 96.7 | | Tensile Elongation (%) | 0.0 to 56 | 3.0 to 210 | 3.3 to 100 | 2.0 to 100 | | Rockwell Hardness | 94 to 116 | 90 to 110 | 104 to 117 | 109 to 120 | | Notched Izod Impact (J/m) | 7.00 to 507 | 53.4 to 865 | 30.0 to 604 | 25.0 to 697 | | DTUL @ 66 psi (0.45 MPa) (°C) | 76.6 to 105 | 77.4 to 102 | 96.8 to 150 | 89.8 to 132 | | DTUL @ 264 psi (1.8 MPa) (°C) | 73.9 to 99.0 | 61.3 to 91.3 | 72.5 to 91.1 | 77.9 to 120 | | CLTE, Flow (cm/cm/°C) | 8.0E-6 to 0.20 | 0.000099 to 0.020 | 0.000099 to 0.00010 | 8.0E-6 to 15000 |
|
|