| Acrylonitrile Ethylene Styrene (AES)
Processing Information |
Share This Page
• Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.04 to 1.06 | | Mold Shrinkage, Flow (in/in) | 0.0050 to 0.0080 | | Melt Mass Flow Rate (g/10 min) | 3.5 to 31 | | Drying Temperature (°F) | 176 to 195 | | Drying Time (hr) | 2.0 to 3.5 | | Suggested Max Moisture (%) | 0.050 | | Suggested Max Regrind (%) | 5 | | Injection Pressure (psi) | 15200 | | Rear Temperature (°F) | 388 to 482 | | Middle Temperature (°F) | 428 to 482 | | Front Temperature (°F) | 446 to 482 | | Nozzle Temperature (°F) | 417 to 464 | | Processing (Melt) Temp (°F) | 464 to 500 | | Mold Temperature (°F) | 131 to 140 |
SI
|
| Density (g/cm³) | 1.04 to 1.06 | | Mold Shrinkage, Flow (cm/cm) | 0.0050 to 0.0080 | | Melt Mass Flow Rate (g/10 min) | 3.5 to 31 | | Drying Temperature (°C) | 80.0 to 90.5 | | Drying Time (hr) | 2.0 to 3.5 | | Suggested Max Moisture (%) | 0.050 | | Suggested Max Regrind (%) | 5 | | Injection Pressure (MPa) | 105 | | Rear Temperature (°C) | 198 to 250 | | Middle Temperature (°C) | 220 to 250 | | Front Temperature (°C) | 230 to 250 | | Nozzle Temperature (°C) | 214 to 240 | | Processing (Melt) Temp (°C) | 240 to 260 | | Mold Temperature (°C) | 55.0 to 60.0 |
|
|