|
Acrylonitrile Styrene (AS) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.07 to 1.08 | | Mold Shrinkage, Flow (in/in) | 0.0035 to 0.0050 | | Melt Mass Flow Rate (g/10 min) | 9.0 to 35 | | Drying Temperature (°F) | 176 | | Drying Time (hr) | 2.0 to 4.0 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | -- | | Rear Temperature (°F) | 446 | | Middle Temperature (°F) | 446 | | Front Temperature (°F) | 446 | | Nozzle Temperature (°F) | -- | | Processing (Melt) Temp (°F) | -- | | Mold Temperature (°F) | 140 |
SI
|
| Density (g/cm³) | 1.07 to 1.08 | | Mold Shrinkage, Flow (cm/cm) | 0.0035 to 0.0050 | | Melt Mass Flow Rate (g/10 min) | 9.0 to 35 | | Drying Temperature (°C) | 80.0 | | Drying Time (hr) | 2.0 to 4.0 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | -- | | Rear Temperature (°C) | 230 | | Middle Temperature (°C) | 230 | | Front Temperature (°C) | 230 | | Nozzle Temperature (°C) | -- | | Processing (Melt) Temp (°C) | -- | | Mold Temperature (°C) | 59.9 to 60.0 |
|
|