| Acetal (Acetal)
Processing Information |
Share This Page
• Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.40 to 1.43 | 1.41 to 1.42 | | Mold Shrinkage, Flow (in/in) | 0.016 to 0.026 | 0.019 to 0.020 | | Melt Mass Flow Rate (g/10 min) | 1.4 to 27 | -- | | Drying Temperature (°F) | 174 to 250 | 174 to 186 | | Drying Time (hr) | 1.5 to 5.1 | 1.9 to 3.5 | | Suggested Max Moisture (%) | 0.15 to 0.20 | 0.20 | | Suggested Max Regrind (%) | 20 to 30 | 20 to 25 | | Injection Pressure (psi) | 7550 to 15700 | 12000 to 15600 | | Rear Temperature (°F) | 336 to 372 | 372 to 391 | | Middle Temperature (°F) | 364 to 401 | 371 to 391 | | Front Temperature (°F) | 372 to 420 | 371 to 401 | | Nozzle Temperature (°F) | 383 to 405 | 400 to 405 | | Processing (Melt) Temp (°F) | 373 to 412 | 390 to 420 | | Mold Temperature (°F) | 120 to 207 | 117 to 195 |
SI
|
| Density (g/cm³) | 1.40 to 1.43 | 1.41 to 1.42 | | Mold Shrinkage, Flow (cm/cm) | 0.016 to 0.026 | 0.019 to 0.020 | | Melt Mass Flow Rate (g/10 min) | 1.4 to 27 | -- | | Drying Temperature (°C) | 78.9 to 121 | 78.9 to 85.3 | | Drying Time (hr) | 1.5 to 5.1 | 1.9 to 3.5 | | Suggested Max Moisture (%) | 0.15 to 0.20 | 0.20 | | Suggested Max Regrind (%) | 20 to 30 | 20 to 25 | | Injection Pressure (MPa) | 52.0 to 108 | 82.7 to 108 | | Rear Temperature (°C) | 169 to 189 | 189 to 199 | | Middle Temperature (°C) | 184 to 205 | 188 to 200 | | Front Temperature (°C) | 189 to 216 | 188 to 205 | | Nozzle Temperature (°C) | 195 to 207 | 205 to 207 | | Processing (Melt) Temp (°C) | 190 to 211 | 199 to 216 | | Mold Temperature (°C) | 48.9 to 97.3 | 47.2 to 90.6 |
|
|