| Acrylic (Acrylic)
Processing Information |
|
|
English
|
| Specific Gravity | 1.16 to 1.20 | 1.05 to 1.09 | 1.11 to 1.19 | 1.34 to 1.35 | | Mold Shrinkage, Flow (in/in) | 0.0035 to 0.0060 | 0.0039 to 0.0040 | 0.0040 to 0.0059 | 0.0030 to 0.0050 | | Melt Mass Flow Rate (g/10 min) | 0.30 to 4.6 | 0.40 to 9.1 | -- | 34 | | Drying Temperature (°F) | 171 to 185 | 149 to 180 | 200 | 130 to 145 | | Drying Time (hr) | 2.5 to 5.0 | 2.0 to 2.1 | 4.0 | 4.0 | | Suggested Max Moisture (%) | 0.097 to 0.30 | -- | -- | -- | | Suggested Max Regrind (%) | 25 | -- | -- | -- | | Injection Pressure (psi) | 10500 to 16000 | 15000 | 12500 | -- | | Rear Temperature (°F) | 378 to 491 | 384 to 391 | -- | -- | | Middle Temperature (°F) | 427 to 476 | 395 to 420 | -- | 350 | | Front Temperature (°F) | 438 to 474 | 404 to 441 | -- | 350 | | Nozzle Temperature (°F) | 429 to 476 | 380 to 440 | -- | -- | | Processing (Melt) Temp (°F) | 435 to 475 | 429 to 441 | 393 | 395 to 400 | | Mold Temperature (°F) | 140 to 171 | 104 to 116 | 200 | 115 |
SI
|
| Specific Gravity (g/cm³) | 1.15 to 1.19 | 1.04 to 1.09 | 1.11 to 1.19 | 1.34 to 1.35 | | Mold Shrinkage, Flow (cm/cm) | 0.0035 to 0.0060 | 0.0039 to 0.0040 | 0.0040 to 0.0059 | 0.0030 to 0.0050 | | Melt Mass Flow Rate (g/10 min) | 0.30 to 4.6 | 0.40 to 9.1 | -- | 34 | | Drying Temperature (°C) | 77.0 to 85.0 | 65.0 to 82.2 | 93.3 | 54.4 to 62.8 | | Drying Time (hr) | 2.5 to 5.0 | 2.0 to 2.1 | 4.0 | 4.0 | | Suggested Max Moisture (%) | 0.097 to 0.30 | -- | -- | -- | | Suggested Max Regrind (%) | 25 | -- | -- | -- | | Injection Pressure (MPa) | 72.4 to 110 | 103 | 86.2 | -- | | Rear Temperature (°C) | 192 to 255 | 195 to 199 | -- | -- | | Middle Temperature (°C) | 220 to 247 | 201 to 216 | -- | 177 | | Front Temperature (°C) | 226 to 246 | 207 to 227 | -- | 177 | | Nozzle Temperature (°C) | 220 to 247 | 193 to 227 | -- | -- | | Processing (Melt) Temp (°C) | 224 to 246 | 221 to 227 | 200 | 202 to 204 | | Mold Temperature (°C) | 59.9 to 77.1 | 40.2 to 46.5 | 93.3 | 46.1 |
|
|