|
Epoxy (Epoxy) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.01 to 2.00 | 1.01 to 1.25 | | Mold Shrinkage, Flow (in/in) | 0.00010 to 0.0051 | 0.083 to 0.085 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Drying Temperature (°F) | -- | -- | | Drying Time (hr) | -- | -- | | Suggested Max Moisture (%) | -- | -- | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (psi) | 4170 to 4250 | -- | | Rear Temperature (°F) | -- | -- | | Middle Temperature (°F) | -- | -- | | Front Temperature (°F) | -- | -- | | Nozzle Temperature (°F) | -- | -- | | Processing (Melt) Temp (°F) | 303 | -- | | Mold Temperature (°F) | -- | 330 |
SI
|
| Density (g/cm³) | 1.01 to 2.00 | 1.01 to 1.25 | | Mold Shrinkage, Flow (cm/cm) | 0.00010 to 0.0051 | 0.083 to 0.085 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Drying Temperature (°C) | -- | -- | | Drying Time (hr) | -- | -- | | Suggested Max Moisture (%) | -- | -- | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (MPa) | 28.7 to 29.3 | -- | | Rear Temperature (°C) | -- | -- | | Middle Temperature (°C) | -- | -- | | Front Temperature (°C) | -- | -- | | Nozzle Temperature (°C) | -- | -- | | Processing (Melt) Temp (°C) | 150 to 151 | -- | | Mold Temperature (°C) | -- | 166 |
|
|