| Ionomer (Ionomer)
Processing Information |
|
|
English
|
| Specific Gravity | 0.937 to 0.973 | | Mold Shrinkage, Flow (in/in) | 0.0036 to 0.012 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°F) | 119 to 177 | | Drying Time (hr) | 3.0 to 6.0 | | Suggested Max Moisture (%) | 0.080 to 0.082 | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | 11500 | | Rear Temperature (°F) | 320 to 325 | | Middle Temperature (°F) | 424 to 428 | | Front Temperature (°F) | 432 to 479 | | Nozzle Temperature (°F) | 435 to 490 | | Processing (Melt) Temp (°F) | 431 to 506 | | Mold Temperature (°F) | 65.0 to 101 |
SI
|
| Specific Gravity (g/cm³) | 0.935 to 0.971 | | Mold Shrinkage, Flow (cm/cm) | 0.0036 to 0.012 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°C) | 48.2 to 80.3 | | Drying Time (hr) | 3.0 to 6.0 | | Suggested Max Moisture (%) | 0.080 to 0.082 | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | 79.3 to 79.5 | | Rear Temperature (°C) | 160 to 163 | | Middle Temperature (°C) | 218 to 220 | | Front Temperature (°C) | 222 to 248 | | Nozzle Temperature (°C) | 224 to 254 | | Processing (Melt) Temp (°C) | 222 to 264 | | Mold Temperature (°C) | 18.3 to 38.1 |
|
|