| Maleic Anhydride Grafted Polymer (MAH-g) Typical Properties |
|
Free Access to 80,000 Datasheets
|
|
|
-
-
-
|
English
|
| Density (g/cm³) | 0.875 to 0.960 | | Melt Mass Flow Rate (g/10 min) | 1.0 to 2.1 | | Flexural Modulus (psi) | 2000 to 134000 | | Tensile Strength (psi) | 1160 to 2370 | | Tensile Elongation (%) | 100 to 1000 | | Rockwell Hardness | -- | | Notched Izod Impact (ft·lb/in) | -- | | DTUL @ 66 psi (0.45 MPa) (°F) | -- | | DTUL @ 264 psi (1.8 MPa) (°F) | -- | | CLTE, Flow (in/in/°F) | -- |
SI
|
| Density (g/cm³) | 0.875 to 0.960 | | Melt Mass Flow Rate (g/10 min) | 1.0 to 2.1 | | Flexural Modulus (MPa) | 13.8 to 924 | | Tensile Strength (MPa) | 8.00 to 16.3 | | Tensile Elongation (%) | 100 to 1000 | | Rockwell Hardness | -- | | Notched Izod Impact (J/m) | -- | | DTUL @ 66 psi (0.45 MPa) (°C) | -- | | DTUL @ 264 psi (1.8 MPa) (°C) | -- | | CLTE, Flow (cm/cm/°C) | -- |
|
|