| Melamine (Melamine) Typical Properties |
Share This Page
• Free Access to 80,000 Datasheets
|
|
|
-
-
-
|
English
|
| Density (g/cm³) | 1.41 to 1.48 | 1.58 to 1.67 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Flexural Modulus (psi) | -- | 1.12E+6 to 1.62E+6 | | Tensile Strength (psi) | -- | 8120 to 10900 | | Tensile Elongation (%) | -- | 0.60 to 0.90 | | Rockwell Hardness | -- | 71 to 86 | | Notched Izod Impact (ft·lb/in) | 0.300 | 0.294 to 0.380 | | DTUL @ 66 psi (0.45 MPa) (°F) | -- | -- | | DTUL @ 264 psi (1.8 MPa) (°F) | -- | 349 to 396 | | CLTE, Flow (in/in/°F) | -- | 0.000029 |
SI
|
| Density (g/cm³) | 1.41 to 1.48 | 1.58 to 1.67 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Flexural Modulus (MPa) | -- | 7730 to 11200 | | Tensile Strength (MPa) | -- | 56.0 to 75.0 | | Tensile Elongation (%) | -- | 0.60 to 0.90 | | Rockwell Hardness | -- | 71 to 86 | | Notched Izod Impact (J/m) | 16.0 | 15.7 to 20.3 | | DTUL @ 66 psi (0.45 MPa) (°C) | -- | -- | | DTUL @ 264 psi (1.8 MPa) (°C) | -- | 176 to 202 | | CLTE, Flow (cm/cm/°C) | -- | 0.000052 to 0.000053 |
|
|