| Polybutadiene Rubber (PBR) Typical Properties |
Share This Page
• Free Access to 80,000 Datasheets
|
|
|
-
-
-
|
English
|
| Density (g/cm³) | 0.890 to 0.908 | 0.917 to 0.998 | -- | 0.932 to 0.990 | | Melt Mass Flow Rate (g/10 min) | -- | -- | -- | 60 to 100 | | Flexural Modulus (psi) | -- | -- | -- | -- | | Tensile Strength (psi) | 1810 to 2820 | 1610 to 4340 | 2690 to 3560 | 435 to 1020 | | Tensile Elongation (%) | 290 to 300 | 280 to 590 | 350 to 550 | 500 to 700 | | Rockwell Hardness | -- | -- | -- | -- | | Notched Izod Impact (ft·lb/in) | -- | -- | -- | -- | | DTUL @ 66 psi (0.45 MPa) (°F) | -- | -- | -- | -- | | DTUL @ 264 psi (1.8 MPa) (°F) | -- | -- | -- | -- | | CLTE, Flow (in/in/°F) | -- | -- | -- | -- |
SI
|
| Density (g/cm³) | 0.890 to 0.908 | 0.917 to 0.998 | -- | 0.932 to 0.990 | | Melt Mass Flow Rate (g/10 min) | -- | -- | -- | 60 to 100 | | Flexural Modulus (MPa) | -- | -- | -- | -- | | Tensile Strength (MPa) | 12.5 to 19.4 | 11.1 to 29.9 | 18.5 to 24.5 | 3.00 to 7.00 | | Tensile Elongation (%) | 290 to 300 | 280 to 590 | 350 to 550 | 500 to 700 | | Rockwell Hardness | -- | -- | -- | -- | | Notched Izod Impact (J/m) | -- | -- | -- | -- | | DTUL @ 66 psi (0.45 MPa) (°C) | -- | -- | -- | -- | | DTUL @ 264 psi (1.8 MPa) (°C) | -- | -- | -- | -- | | CLTE, Flow (cm/cm/°C) | -- | -- | -- | -- |
|
|