| Polyvinyl Chloride (PVC)
Processing Information |
Share This Page
• Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.46 to 1.52 | 1.15 to 1.29 | 0.360 | 1.07 to 1.32 | 0.360 to 1.40 | 1.14 to 1.45 | 0.778 to 1.47 | 1.29 to 1.58 | 1.14 to 1.45 | 1.18 to 1.33 | 1.16 to 1.26 | 1.68 to 1.70 | | Mold Shrinkage, Flow (in/in) | 0.0060 | 0.0035 to 0.0050 | -- | 0.017 to 0.018 | -- | 0.0095 to 0.021 | 0.0035 to 0.0036 | 0.011 | 0.0035 to 0.0061 | -- | -- | -- | | Melt Mass Flow Rate (g/10 min) | 5.0 to 21 | 28 | -- | 3.6 to 30 | -- | 0.42 to 12 | 1.4 to 54 | 19 to 87 | 6.2 to 42 | 0.46 to 42 | -- | -- | | Drying Temperature (°F) | -- | 155 | -- | 178 | -- | -- | 150 | -- | -- | -- | -- | -- | | Drying Time (hr) | -- | 2.0 | -- | 2.5 | -- | -- | 3.0 | -- | -- | -- | -- | -- | | Suggested Max Moisture (%) | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | | Suggested Max Regrind (%) | -- | -- | -- | 20 | -- | -- | 50 | -- | 30 | -- | -- | -- | | Injection Pressure (psi) | -- | -- | -- | 12400 | -- | -- | 15600 to 16000 | -- | -- | -- | -- | -- | | Rear Temperature (°F) | -- | 290 | -- | 311 to 375 | -- | 280 to 290 | 324 to 325 | -- | 328 to 338 | 290 | -- | -- | | Middle Temperature (°F) | -- | 300 | -- | 335 to 375 | -- | 300 to 310 | 359 to 360 | -- | 337 to 338 | 300 | -- | -- | | Front Temperature (°F) | -- | 310 | -- | 335 to 375 | -- | 310 to 320 | 369 to 370 | -- | 338 to 347 | 310 | -- | -- | | Nozzle Temperature (°F) | -- | 330 | -- | 347 | -- | 320 to 340 | 364 to 365 | -- | 356 | 310 | -- | -- | | Processing (Melt) Temp (°F) | 398 to 399 | 399 to 405 | -- | 300 to 380 | -- | 329 to 392 | 367 to 403 | 370 to 381 | 329 to 370 | 388 to 390 | 315 | -- | | Mold Temperature (°F) | -- | -- | -- | 75.0 to 109 | -- | 75.0 to 85.2 | 89.6 to 90.0 | -- | 104 | -- | -- | -- |
SI
|
| Density (g/cm³) | 1.46 to 1.52 | 1.15 to 1.29 | 0.360 | 1.07 to 1.32 | 0.360 to 1.40 | 1.14 to 1.45 | 0.778 to 1.47 | 1.29 to 1.58 | 1.14 to 1.45 | 1.18 to 1.33 | 1.16 to 1.26 | 1.68 to 1.70 | | Mold Shrinkage, Flow (cm/cm) | 0.0060 | 0.0035 to 0.0050 | -- | 0.017 to 0.018 | -- | 0.0095 to 0.021 | 0.0035 to 0.0036 | 0.011 | 0.0035 to 0.0061 | -- | -- | -- | | Melt Mass Flow Rate (g/10 min) | 5.0 to 21 | 28 | -- | 3.6 to 30 | -- | 0.42 to 12 | 1.4 to 54 | 19 to 87 | 6.2 to 42 | 0.46 to 42 | -- | -- | | Drying Temperature (°C) | -- | 68.3 | -- | 81.1 | -- | -- | 65.6 | -- | -- | -- | -- | -- | | Drying Time (hr) | -- | 2.0 | -- | 2.5 | -- | -- | 3.0 | -- | -- | -- | -- | -- | | Suggested Max Moisture (%) | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | -- | | Suggested Max Regrind (%) | -- | -- | -- | 20 | -- | -- | 50 | -- | 30 | -- | -- | -- | | Injection Pressure (MPa) | -- | -- | -- | 85.5 | -- | -- | 108 to 110 | -- | -- | -- | -- | -- | | Rear Temperature (°C) | -- | 143 | -- | 155 to 191 | -- | 138 to 143 | 162 to 163 | -- | 165 to 170 | 143 | -- | -- | | Middle Temperature (°C) | -- | 149 | -- | 168 to 191 | -- | 149 to 154 | 182 | -- | 170 | 149 | -- | -- | | Front Temperature (°C) | -- | 154 | -- | 168 to 191 | -- | 154 to 160 | 187 to 188 | -- | 170 to 175 | 154 | -- | -- | | Nozzle Temperature (°C) | -- | 166 | -- | 175 | -- | 160 to 171 | 185 | -- | 180 | 154 | -- | -- | | Processing (Melt) Temp (°C) | 203 to 204 | 204 to 207 | -- | 149 to 193 | -- | 165 to 200 | 186 to 206 | 188 to 194 | 165 to 188 | 198 to 199 | 157 | -- | | Mold Temperature (°C) | -- | -- | -- | 23.9 to 42.5 | -- | 23.9 to 29.5 | 32.0 to 32.2 | -- | 40.0 | -- | -- | -- |
|
|