| Phenolic (Phenolic)
Processing Information |
|
|
English
|
| Specific Gravity | 1.41 to 1.51 | 1.33 to 1.62 | | Mold Shrinkage, Flow (in/in) | 0.0033 to 0.0090 | 0.0038 to 0.010 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Drying Temperature (°F) | -- | -- | | Drying Time (hr) | -- | -- | | Suggested Max Moisture (%) | -- | -- | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (psi) | -- | 1250 | | Rear Temperature (°F) | -- | 154 to 170 | | Middle Temperature (°F) | -- | 180 | | Front Temperature (°F) | -- | 194 to 195 | | Nozzle Temperature (°F) | -- | -- | | Processing (Melt) Temp (°F) | -- | 337 to 340 | | Mold Temperature (°F) | -- | 345 to 347 |
SI
|
| Specific Gravity (g/cm³) | 1.41 to 1.50 | 1.33 to 1.62 | | Mold Shrinkage, Flow (cm/cm) | 0.0033 to 0.0090 | 0.0038 to 0.010 | | Melt Mass Flow Rate (g/10 min) | -- | -- | | Drying Temperature (°C) | -- | -- | | Drying Time (hr) | -- | -- | | Suggested Max Moisture (%) | -- | -- | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (MPa) | -- | 8.60 | | Rear Temperature (°C) | -- | 67.5 to 76.7 | | Middle Temperature (°C) | -- | 82.2 | | Front Temperature (°C) | -- | 90.0 to 90.6 | | Nozzle Temperature (°C) | -- | -- | | Processing (Melt) Temp (°C) | -- | 170 to 171 | | Mold Temperature (°C) | -- | 174 to 175 |
|
|