|
Polyarylate (Polyarylate) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.20 to 1.36 | | Mold Shrinkage, Flow (in/in) | 0.0079 to 0.0081 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°F) | 266 | | Drying Time (hr) | 7.0 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | 19800 to 19900 | | Rear Temperature (°F) | 536 to 608 | | Middle Temperature (°F) | 590 to 662 | | Front Temperature (°F) | 608 to 680 | | Nozzle Temperature (°F) | 608 to 680 | | Processing (Melt) Temp (°F) | -- | | Mold Temperature (°F) | 212 to 275 |
SI
|
| Density (g/cm³) | 1.20 to 1.36 | | Mold Shrinkage, Flow (cm/cm) | 0.0079 to 0.0081 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°C) | 130 | | Drying Time (hr) | 7.0 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | 137 | | Rear Temperature (°C) | 280 to 320 | | Middle Temperature (°C) | 310 to 350 | | Front Temperature (°C) | 320 to 360 | | Nozzle Temperature (°C) | 320 to 360 | | Processing (Melt) Temp (°C) | -- | | Mold Temperature (°C) | 100 to 135 |
|
|