|
Proprietary (Proprietary) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 0.900 to 1.14 | | Mold Shrinkage, Flow (in/in) | -- | | Melt Mass Flow Rate (g/10 min) | 1.5 to 16 | | Drying Temperature (°F) | 180 | | Drying Time (hr) | 2.0 | | Suggested Max Moisture (%) | 0.020 | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | 15000 | | Rear Temperature (°F) | 380 | | Middle Temperature (°F) | 390 | | Front Temperature (°F) | 400 | | Nozzle Temperature (°F) | 420 | | Processing (Melt) Temp (°F) | 420 to 422 | | Mold Temperature (°F) | 130 |
SI
|
| Density (g/cm³) | 0.900 to 1.14 | | Mold Shrinkage, Flow (cm/cm) | -- | | Melt Mass Flow Rate (g/10 min) | 1.5 to 16 | | Drying Temperature (°C) | 82.2 | | Drying Time (hr) | 2.0 | | Suggested Max Moisture (%) | 0.020 | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | 103 | | Rear Temperature (°C) | 193 | | Middle Temperature (°C) | 199 | | Front Temperature (°C) | 204 | | Nozzle Temperature (°C) | 216 | | Processing (Melt) Temp (°C) | 216 to 217 | | Mold Temperature (°C) | 54.4 |
|
|