|
Styrene Acrylonitrile Silicone (SAS) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 1.03 to 1.13 | | Mold Shrinkage, Flow (in/in) | 0.0050 to 0.0070 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°F) | 190 | | Drying Time (hr) | 3.5 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | 15200 | | Rear Temperature (°F) | 392 to 419 | | Middle Temperature (°F) | 428 to 464 | | Front Temperature (°F) | 455 to 482 | | Nozzle Temperature (°F) | 419 to 420 | | Processing (Melt) Temp (°F) | 464 to 482 | | Mold Temperature (°F) | 131 |
SI
|
| Density (g/cm³) | 1.03 to 1.13 | | Mold Shrinkage, Flow (cm/cm) | 0.0050 to 0.0070 | | Melt Mass Flow Rate (g/10 min) | -- | | Drying Temperature (°C) | 87.5 | | Drying Time (hr) | 3.5 | | Suggested Max Moisture (%) | -- | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | 105 | | Rear Temperature (°C) | 200 to 215 | | Middle Temperature (°C) | 220 to 240 | | Front Temperature (°C) | 235 to 250 | | Nozzle Temperature (°C) | 215 to 216 | | Processing (Melt) Temp (°C) | 240 to 250 | | Mold Temperature (°C) | 55.0 |
|
|