| Silicone (Silicone)
Processing Information |
Share This Page
• Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 0.965 to 1.36 | 1.42 to 1.44 | | Mold Shrinkage, Flow (in/in) | 0.00010 to 0.070 | 0.040 | | Melt Mass Flow Rate (g/10 min) | -- | 6.2 to 7.2 | | Drying Temperature (°F) | -- | 176 to 212 | | Drying Time (hr) | -- | 2.5 to 5.0 | | Suggested Max Moisture (%) | -- | 0.20 | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (psi) | -- | -- | | Rear Temperature (°F) | -- | -- | | Middle Temperature (°F) | -- | -- | | Front Temperature (°F) | -- | -- | | Nozzle Temperature (°F) | -- | -- | | Processing (Melt) Temp (°F) | -- | -- | | Mold Temperature (°F) | -- | -- |
SI
|
| Density (g/cm³) | 0.965 to 1.36 | 1.42 to 1.44 | | Mold Shrinkage, Flow (cm/cm) | 0.00010 to 0.070 | 0.040 | | Melt Mass Flow Rate (g/10 min) | -- | 6.2 to 7.2 | | Drying Temperature (°C) | -- | 80.0 to 100 | | Drying Time (hr) | -- | 2.5 to 5.0 | | Suggested Max Moisture (%) | -- | 0.20 | | Suggested Max Regrind (%) | -- | -- | | Injection Pressure (MPa) | -- | -- | | Rear Temperature (°C) | -- | -- | | Middle Temperature (°C) | -- | -- | | Front Temperature (°C) | -- | -- | | Nozzle Temperature (°C) | -- | -- | | Processing (Melt) Temp (°C) | -- | -- | | Mold Temperature (°C) | -- | -- |
|
|