|
Thermoplastic, Unspecified (TP, Unspecified) Processing Information
|
|
Free Access to 80,000 Datasheets
|
|
English
|
| Density (g/cm³) | 0.859 to 1.64 | | Mold Shrinkage, Flow (in/in) | 0.00070 to 0.0042 | | Melt Mass Flow Rate (g/10 min) | 0.40 to 22 | | Drying Temperature (°F) | 159 to 194 | | Drying Time (hr) | 3.0 | | Suggested Max Moisture (%) | 0.10 to 0.15 | | Suggested Max Regrind (%) | -- | | Injection Pressure (psi) | 12500 to 12800 | | Rear Temperature (°F) | 355 to 418 | | Middle Temperature (°F) | 365 to 429 | | Front Temperature (°F) | 378 to 445 | | Nozzle Temperature (°F) | 379 to 393 | | Processing (Melt) Temp (°F) | 387 to 464 | | Mold Temperature (°F) | 75.0 to 118 |
SI
|
| Density (g/cm³) | 0.859 to 1.64 | | Mold Shrinkage, Flow (cm/cm) | 0.00070 to 0.0042 | | Melt Mass Flow Rate (g/10 min) | 0.40 to 22 | | Drying Temperature (°C) | 70.5 to 90.0 | | Drying Time (hr) | 3.0 | | Suggested Max Moisture (%) | 0.10 to 0.15 | | Suggested Max Regrind (%) | -- | | Injection Pressure (MPa) | 86.2 to 88.3 | | Rear Temperature (°C) | 179 to 214 | | Middle Temperature (°C) | 185 to 220 | | Front Temperature (°C) | 192 to 229 | | Nozzle Temperature (°C) | 193 to 200 | | Processing (Melt) Temp (°C) | 197 to 240 | | Mold Temperature (°C) | 23.9 to 47.5 |
|
|