| Thermoset Elastomer (TSE) Typical Properties |
|
|
|
-
-
-
|
English
|
| Specific Gravity | -- | | Melt Mass Flow Rate (g/10 min) | -- | | Flexural Modulus (psi) | -- | | Tensile Strength (psi) | 200 to 300 | | Tensile Elongation (%) | 50 to 350 | | Rockwell Hardness | -- | | Notched Izod Impact (ft·lb/in) | -- | | DTUL at 66 psi (0.45 MPa) (°F) | -- | | DTUL at 264 psi (1.8 MPa) (°F) | -- | | CLTE, Flow (in/in/°F) | 0.00013 to 0.00018 |
SI
|
| Specific Gravity (g/cm³) | -- | | Melt Mass Flow Rate (g/10 min) | -- | | Flexural Modulus (MPa) | -- | | Tensile Strength (MPa) | 1.38 to 2.07 | | Tensile Elongation (%) | 50 to 350 | | Rockwell Hardness | -- | | Notched Izod Impact (J/m) | -- | | DTUL at 66 psi (0.45 MPa) (°C) | -- | | DTUL at 264 psi (1.8 MPa) (°C) | -- | | CLTE, Flow (cm/cm/°C) | 0.00023 to 0.00033 |
|
|