Polybutene-1 DP8911M - LyondellBasell

Polybutene-1 DP8911M by LyondellBasell Industries is a PB (Polybutylene) plastic material.

Polybutene-1 grade DP8911M is a random copolymer of butene-1 with high ethylene content, containing free organic peroxide additives.
DP8911M is primarily used as a blend component in hot melt adhesive (HMA) formulations and sealant compounds, in order to increase open time and maintain mechanical integrity at higher temperatures (higher shear adhesion failure temperature or SAFT). It can be used in combination with a wide variety of non-polar resins and waxes.
The presence of free organic peroxides in polybutene-1 grade DP8911M allows the reduction of melt viscosity in elevated temperature processing. The rate of further peroxide cracking depends on the time and temperature of processing. To achieve 100% utilization of the residual peroxide, a temperature of 180°C or higher is usually applied for at least 30 minutes. In order to achieve the target viscosity at 180°C, the product should be kept in a closed container during processing, to minimize the loss of the organic peroxide.
Food law compliance information about this product can be found in separate product documentation.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.

Non-wovens, Non-woven, Staple Fibers, Staple Fiber, Spunbond Non-Wovens, Spunbond Non-woven, Plastics Modification, Plastic Modification.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

Polybutene1 DP8911M, Polybutene1DP8911M, Polybutene-1 , Polybutene1, Polybutene:1, Polybutene/1, Polybutene+1, Polybutene_1, Polybutene 1, DP 8911 M, DP8911, 8911M, DP8911M, 8911DP, Polybutylene, PB, LyondellBasell, LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.
Features (Alternate Representations)
Random Copolymer.
Uses (Alternate Representations)
Non-wovens, Non-woven, Staple Fibers, Staple Fiber, Spunbond Non-Wovens, Spunbond Non-woven, Plastics Modification, Plastic Modification.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Polybutene1 DP8911M, Polybutene1DP8911M, Polybutene-1 , Polybutene1, Polybutene:1, Polybutene/1, Polybutene+1, Polybutene_1, Polybutene 1, DP 8911 M, DP8911, 8911M, DP8911M, 8911DP, Polybutylene, PB, LyondellBasell, LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

Polybutene-1 DP8911M - LyondellBasell Industries -