Tecnoflon NFT 7030 - Solvay Solexis - Fluoroelastomer (PTFE Micropowder) Plastic

TECNOFLON® NFT 7030 is a new peroxide curable fluoroelastomer with incorporated modified nano-PTFE filler (the particle size is about 45 nm), obtained by means of an innovative patented nano-composite technology.

Due to the resulting improved interaction between the fluoroelastomer matrix and the modified PTFE filler and thanks to the use of a clean coagulation and packaging process, some of the basic properties of Tecnoflon® NFT 7030 are as follows:

High compound purity

Low friction

Low abrasion

Good mechanical and sealing properties

Low permeability

Reduced post cure time

Tecnoflon® NFT 7030 is especially designed for high purity seals, for instance as required by semiconductor and flat panel displays manufacturing. In some cases, in order to prevent process contamination, conventional fillers, either carbon black or mineral fillers, cannot be used.

On the contrary, the use of a clean filler as PTFE greatly reduces metal and organic species elution in wet processes as well as particle generation in dry processes. Moreover the PTFE dispersion at the nano-scale guarantees a more homogeneous filler distribution coupled with excellent overall mechanical and sealing properties.

Tecnoflon® NFT 7030 can be used for compression, injection and transfer molding of shaft seals, valve seals, O-rings, gaskets or any
item requiring higher purity, superior chemical resistance, reduced friction coefficient and permeability.

Tecnoflon® NFT 7030 can be combined with the cure system and other typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. This material can be extruded into hoses or profiles and can be calendered to make sheet stocks or belting. Finished goods may be produced by a variety of rubber processing methods.

Material Status

Commercial: Active

Availability

North America

Test Standards Available

ASTM

Filler / Reinforcement

PTFE Micropowder

Features

Fast Cure

Good Abrasion Resistance

Good Chemical Resistance

Good Heat Seal

High Purity

Low Friction

Uses

Belts/Belt Repair

Electronic Displays

Gaskets

Hose

Profiles

Seals

Semiconductor Molding Compounds

Sheet

Valves/Valve Parts

Appearance

Translucent

Forms

Slab

Processing Method

Calendering

Compression Molding

Extrusion

Injection Molding

Resin Transfer Molding

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 82297 full plastic material data sheets from 774 global resin suppliers.
Features (Alternate Representations)
Low Friction, Good Heat Seal, High Purity, Fast Cure, Fast Curing, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant.
Uses (Alternate Representations)
Electronic Displays, Valves, Valve Parts, Gaskets, Gasketing, Belts/Belt Repair, Belt Repair.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Tecnoflon® NFT 7030, Tecnoflon NFT 7030, Tecnoflon® , Tecnoflon, TecnoflonNFT7030, NFT 7030, NFT7030, Fluoroelastomer, Fluorelastomer, Fluoropolymer, Solvay Solexis, 7030NFT

Tecnoflon® NFT 7030 - Solvay Solexis, Inc. - Fluoroelastomer

Tecnoflon®
NFT 7030 - Solvay Solexis, Inc. - Fluoroelastomer