Teflon PTFE 7A - DuPont Fluoro - Polytetrafluoroethylene Plastic

Teflon PTFE 7A by DuPont Fluoropolymers is a PTFE (Polytetrafluoroethylene) plastic material. This plastic material has approval for 1 Automotive Specifications.

Teflon® PTFE 7A is a white powder with very small particle size. Its most unique feature is high bulk density.

The small particle size of Teflon® PTFE 7A helps to minimize voids even at relatively low molding pressure. High bulk density increases the size of moldings possible from a given mold or press opening.

Teflon® PTFE 7A is preferred for large moldings, such as billets, requiring optimum mechanical and electrical properties. It is also used in a mixture with fillers when they are added to modify the mechanical properties of moldings.

Properly processed products made from neat Teflon® PTFE 7A provide the superior properties typical of the fluoropolymer resins: retention of properties after service at 260°C (500°F), useful properties at -240°C (-400°F), chemical inertness to nearly all industrial chemicals and solvents, and low friction and antistick surfaces. Dielectric properties are outstanding and stable with frequency and temperature. Molded products have moderate stiffness and high ultimate elongation.

In a flame situation, products of Teflon® PTFE 7A resist ignition and do not themselves promote flame spread. When ignited by flame from other sources, their contribution of heat is small and with very little smoke.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under actual fire conditions.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.

This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1). This is just a summary of complete data available in IDES' Prospector.

This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1). This is just a summary of complete data available in IDES' Prospector.

Good Chemical Resistance, Chemical Resistant, Low Friction, High Elongation, Good Stiffness, Low Smoke Emission.

Sanitary Products, Electronic Insulation, Gaskets, Gasketing.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

Teflon PTFE 7A, TeflonPTFE7A, Teflon® PTFE , Teflon PTFE, TeflonPTFE, 7 A, 7A, A7, PTFE7A, PTFE 7A, 7APTFE, PTFE, Polytetrafluoroethylene, Fluoropolymer, DuPont Fluoro

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1). This is just a summary of complete data available in IDES' Prospector.
Agency Rating
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1). This is just a summary of complete data available in IDES' Prospector.
Features (Alternate Representations)
Good Chemical Resistance, Chemical Resistant, Low Friction, High Elongation, Good Stiffness, Low Smoke Emission.
Uses (Alternate Representations)
Sanitary Products, Electronic Insulation, Gaskets, Gasketing.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Teflon PTFE 7A, TeflonPTFE7A, Teflon® PTFE , Teflon PTFE, TeflonPTFE, 7 A, 7A, A7, PTFE7A, PTFE 7A, 7APTFE, PTFE, Polytetrafluoroethylene, Fluoropolymer, DuPont Fluoro

Teflon® PTFE 7A - DuPont Fluoropolymers -