BCC Resins BC 6004 - BCC Products - Epoxy; Epoxide Plastic

BCC Resins BC 6004 by BCC Products Inc. is a Epoxy (Epoxy; Epoxide) plastic material.

BC 6004 is a white thixotropic epoxy surface coat that had the ability to cure and bond to freshly poured wet plaster. This formulated resin compound can be applied with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. BC 6004 features moderate heat resistance and tracing hardness.

Procedure for Plastic Faced Plaster Applications:
BC 6004 should be applied over a properly mold-released surface so that positive removal of the surface coated plaster casting is assured. For best results, two coats approximately 1/16" thick should be used. The first coat should be brushed over the entire surface and then allowed to cure to a gelled or very tacky state. The second coat should be applied over the first. If hemp, glass or other fibrous plaster reinforcements are to be used, they should be placed in the freshly applied second coat immediately. Plaster can then be poured against the wet, second coat of BC 6004. To achieve good adhesion of the epoxy to the plaster, it is recommended that the plaster be poured immediately. The application of two coats of BC 6004 will eliminate surface porosity that sometimes occurs when fast setting, "hot" plaster compounds are cast over a single coat of epoxy.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 82025 full plastic material data sheets from 757 global resin suppliers.

Medium Heat Resistance, Medium Hardness.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

BCC Resins BC 6004, BCC Resins , BCCResinsBC6004, BCCResins, ResinsBC 6004, Resins, ResinsBC6004, BC 6004, BC6004, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 6004BC, 6004ResinsBC

General Information
Product Description
BC 6004 is a white thixotropic epoxy surface coat that had the ability to cure and bond to freshly poured wet plaster. This formulated resin compound can be applied with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. BC 6004 features moderate heat resistance and tracing hardness. Procedure for Plastic Faced Plaster Applications: BC 6004 should be applied over a properly mold-released surface so that positive removal of the surface coated plaster casting is assured. For best results, two coats approximately 1/16" thick should be used. The first coat should be brushed over the entire surface and then allowed to cure to a gelled or very tacky state. The second coat should be applied over the first. If hemp, glass or other fibrous plaster reinforcements are to be used, they should be placed in the freshly applied second coat immediately. Plaster can then be poured against the wet, second coat of BC 6004. To achieve good adhesion of the epoxy to the plaster, it is recommended that the plaster be poured immediately. The application of two coats of BC 6004 will eliminate surface porosity that sometimes occurs when fast setting, "hot" plaster compounds are cast over a single coat of epoxy.
General
Material Status	Commercial: Active
Availability	North America
Test Standards Available	ASTM
Features	Medium Hardness Medium Heat Resistance Thixotropic
Uses	Coating Applications
Appearance	White
Forms	Paste
Processing Method	Coating

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 82025 full plastic material data sheets from 757 global resin suppliers.
Features (Alternate Representations)
Medium Heat Resistance, Medium Hardness.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: BCC Resins BC 6004, BCC Resins , BCCResinsBC6004, BCCResins, ResinsBC 6004, Resins, ResinsBC6004, BC 6004, BC6004, Epoxy; Epoxide, Epoxy Epoxide, Epoxy, BCC Products, EpoxyEpoxide, 6004BC, 6004ResinsBC

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

BCC Resins BC 6004 - BCC Products Inc. -