Elastollan 1195A10 (Film) - BASF TPU - Thermoplastic Polyurethane Elastomer (Polyether) Plastic

Elastollan® 1195A10 (Film) is a polyether-based thermoplastic polyurethane (TPU) that is specifically formulated for sheet and film applications, and exhibits higher temperature resistance compared with standard 85A polyethers. It offers excellent abrasion resistance, toughness, transparency, low temperature properties, hydrolytic stability and fungus resistance. Elastollan® 1195A10 (Film) also conforms to the FDA food contact section, book 21, section 177.2600. As with all TPU products, Elastollan® 1195A10 (Film) must be dried before processing. The drying step is required to both dry the granules and also maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before processing. The typical drying conditions should be 2-4 hours @ 175°-195°F (80°-90°C). Elastollan® 1195A10 (Film) can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.

Material Status

Commercial: Active

Availability

North America

Test Standards Available

ASTM

Features

Fungus Resistant

Good Abrasion Resistance

Hydrolytically Stable

Low Temperature Toughness

Uses

Film

Sheet

Appearance

Clear/Transparent

Forms

Film

Processing Method

Extrusion

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 82258 full plastic material data sheets from 774 global resin suppliers.
Agency Rating
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1). This is just a summary of complete data available in IDES' Prospector.
Features (Alternate Representations)
Good Abrasion Resistance, Abrasion Resistant, Low Temperature Toughness.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Elastollan® 1195A10, Elastollan 1195A10, Elastollan® 1195A10 (Film), Elastollan 1195A10 Film, Elastollan® , Elastollan, Elastollan1195A10Film, 1195 A 10, 1195A10, 1195 A 10 Film, 1195A10 (Film), 1195A10 Film, 1195A, A10, 10Film, 1195A10Film, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, BASF TPU, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane, A1195, Elastolan, Ellastolan

Elastollan® 1195A10 (Film) - BASF Corp. Thermoplastic Polyurethanes - Thermoplastic Polyurethane Elastomer (Polyether)

Elastollan®
1195A10 (Film) - BASF Corp. Thermoplastic Polyurethanes - Thermoplastic Polyurethane Elastomer (Polyether)