AFFINITY GA 1900 - Dow - Plastomer, Polyolefin Plastic

AFFINITY GA 1900 by Dow Plastics is a POP (Plastomer, Polyolefin) plastic material.

- Ultra high clarity, low density, low viscosity polyolefin
- Excellent thermal stability
- Low Tg (Excellent low temperature properties)
- Excellent flexibility
- Non corrosive
- Excellent color and odor
- Excellent compatibility with a wide range of polymers
- Low crystallinity (can be heavily filled)
- Low density (better mileage)
- Excellent adhesion to diverse substrates when formulated
- Complies with U.S. FDA FCN 424 (SEE NOTES)
Consult the regulations for complete details.

AFFINITY* GA 1900 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives.

Note: When used unmodified for food contact applications, this resin will comply with the Federal Food, Drug, and Cosmetic Act as a food contact substance (FCN) as a result of a premarket notification with an effective date of October 7, 2004 under FCN 424. This notification allows for use of this product as articles or components of articles used in contact with all food types under Conditions of Use A through H, as described in U.S. FDA Table 2 of 21 CFR § 176.170(c). It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.

This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2). This is just a summary of complete data available in IDES' Prospector.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

AFFINITY GA 1900, AFFINITYGA1900, AFFINITY™ , AFFINITY, GA1900, 1900GA, Plastomer, Polyolefin, Plastomer Polyolefin, PlastomerPolyolefin, POP, Thermoplastic Elastomer, ThermoplasticElastomer, TPE, Dow

General Information
Product Description
- Ultra high clarity, low density, low viscosity polyolefin - Excellent thermal stability - Low Tg (Excellent low temperature properties) - Excellent flexibility - Non corrosive - Excellent color and odor - Excellent compatibility with a wide range of polymers - Low crystallinity (can be heavily filled) - Low density (better mileage) - Excellent adhesion to diverse substrates when formulated - Complies with U.S. FDA FCN 424 (SEE NOTES) Consult the regulations for complete details. AFFINITY* GA 1900 Polyolefin Plastomer (POP) is produced via INSITE* Technology from Dow Plastics. This product can be used in applications such as polymer modification (i.e. flow enhancement and property enhancement), masterbatch/additive carrier, and hot melt adhesives. Note: When used unmodified for food contact applications, this resin will comply with the Federal Food, Drug, and Cosmetic Act as a food contact substance (FCN) as a result of a premarket notification with an effective date of October 7, 2004 under FCN 424. This notification allows for use of this product as articles or components of articles used in contact with all food types under Conditions of Use A through H, as described in U.S. FDA Table 2 of 21 CFR § 176.170(c). It is the responsibility of the manufacturer of the food contact article to ensure the article is suitable for its intended use. Manufacturers should be aware that foods with a high oil content may compromise the integrity of the packaging.
General
Material Status	Commercial: Active
Availability	Asia Pacific Europe North America
Test Standards Available	ASTM ISO
Forms	Pellets
Processing Method	Extrusion

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.
Agency Rating
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2). This is just a summary of complete data available in IDES' Prospector.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: AFFINITY GA 1900, AFFINITYGA1900, AFFINITY™ , AFFINITY, GA1900, 1900GA, Plastomer, Polyolefin, Plastomer Polyolefin, PlastomerPolyolefin, POP, Thermoplastic Elastomer, ThermoplasticElastomer, TPE, Dow

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

AFFINITY™ GA 1900 - Dow Plastics -