Home > Plastics > Hostaform® > Hostaform® C 13031 K

Hostaform® C 13031 K - Ticona -

Please login or register to view the full datasheet.

Ticona
8040 Dixie Highway
Florence, KY 41042
USA
Phone: 800-833-4882

Hostaform C 13031 K by Ticona is a Acetal (POM) Copolymer (Acetal (POM) Copolymer) plastic material with filler: Calcium Carbonate Filler.

General Information

Product Description

Chemical abbreviation according to ISO 1043-1: POM
Molding compound ISO 9988- POM-K, M-GNR, 04-002, K5

POM copolymer

Easy flowing Injection molding type with higher strength, rigidity
and hardness with special chalk modified; good chemical resistance
to solvents, fuel and strong alkalis as well as good hydrolysis
resistance; high resistance to thermal and oxidative degradation;
good wear properties at the combination HOSTAFORM/steel but also at
HOSTAFORM/HOSTAFORM.

UL-registration in natural and a thickness more than 1.5 mm as UL 94
HB.

Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness
more than 1 mm.

Ranges of applications: For unlubricated or once-only-lubricant
sliding Parts and gear wheels.

FMVSS = Federal Motor Vehicle Safety Standard (USA)
UL = Underwriters Laboratories (USA)

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Test Standards Available

ISO

ISO 10350

Filler / Reinforcement

Calcium Carbonate Filler

Features

Alkali Resistant

Fuel Resistant

Good Chemical Resistance

Good Flow

Good Wear Resistance

High Hardness

High Heat Resistance

High Rigidity

Hydrolysis Resistant

Oxidation Resistant

Solvent Resistant

Uses

Gears

Wheels

Processing Method

Injection Molding

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 78308 full plastic material data sheets from 702 global resin suppliers.
Features (Alternate Representations)
High Hardness, Hard, High Heat Resistance, High Rigidity, Good Wear Resistance, Wear Resistant, Good Chemical Resistance, Chemical Resistant, Good Flow.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Hostaform C 13031 K, HostaformC13031K, Hostaform® , Hostaform, C13031K, C13031, 13031K, 13031C, Acetal (POM) Copolymer, Acetal POM Copolymer, AcetalPOMCopolymer, Acetal Copolymer, Acetal Copolymer, Acetal, POM, Ticona

The information presented on this plastic material data sheet was acquired by IDES from various sources, including the manufacturer of the resin and recognized testing agencies. In some cases, plastic material updates have been integrated directly into the IDES Plastics Database by the resin manufacturer utilizing the IDES Data Maintenance Tool. IDES makes substantial efforts to assure the accuracy of this plastics data. However, IDES assumes no responsibility for the data values and urges that upon final plastic material selection, data points are validated with the resin manufacturer.

IDES Home - Advertising Programs - Business Solutions - Order Online - About IDES - Contact IDES : 800-788-4668 | 307-742-9227

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips