Iotek Ionomers Iotek 3110 Repulsive Pallet Shrink - ExxonMobil - Ethylene Acrylic Acid Copolymer Plastic

Iotek Ionomers Iotek 3110 Repulsive Pallet Shrink by ExxonMobil Chemical is a EAA (Ethylene Acrylic Acid Copolymer) plastic material.

IOTEK 3110 is a sodium ionomer which offers:
- good mechanical strength
- excellent shrink
- easy processability
IOTEK 3110 is the resin of choice as repulsive layer in coextruded pallet shrink films. A typical layer thickness is 10 - 15 µm (0.39 - 0.59 mil). It can be coextruded directly with LDPE. For optimal adhesion to LDPE it is recommended to use an EVA with 5 to 10 % VA as interlayer.
IOTEK 3110 shows excellent sealing behavior even at low temperatures.
To improve processing, it is recommended to add a high level of natural silica as antiblock additive to the IOTEK 3110 layer in the form of a suitable masterbatch. PE based master-batches are not recommended as they can influence the sealing behavior of the film.
Please contact your ExxonMobil representative for recommended masterbatch references. The rheological characteristics and thermal stability of IOTEK 3110 offer good flow properties in coextrusion with a.o. LDPE and EVA.

Processing Conditions:
To minimize corrosion risk, all exposed metal surfaces in the extruder and die should be made from corrosion resistant metals or nickel/chrome plated.
IOTEK 3110 should be fed into the extruder after LDPE of a similar or higher melt index.
Machines should always be completely purged with LDPE or a suitable cleaning compound before shutdown.
Cation containing polymers pick up moisture from the atmosphere if exposed for prolonged periods. It is therefore recommended to reseal tightly the package after each production run.
In case of outdoor use, sodium ionomers can suffer from premature UV degradation. Zinc ionomers, like IOTEK 4200, are preferred or proper UV stabilization packages should be added.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

Iotek Ionomers Iotek 3110 Repulsive Pallet Shrink, IotekIonomersIotek3110RepulsivePalletShrink, Iotek™ Ionomers , Iotek Ionomers, IotekIonomers, Iotek3110RepulsivePalletShrink, Iotek3110, 3110Repulsive, RepulsivePallet, Iotek3110Repulsive, PalletShrink, Iotek3110RepulsivePallet, 3110Iotek, IonomersIotek 3110 Repulsive Pallet Shrink, IonomersIotek3110RepulsivePalletShrink, Ionomers Iotek 3110 Repulsive Pallet Shrink, IonomersIotek, IonomersIotek3110, IonomersIotek3110Repulsive, IonomersIotek3110RepulsivePallet, Ionomers, Ethylene Acrylic Acid Copolymer, EthyleneAcrylicAcidCopolymer, EAA, Thermoplastic Elastomer, ThermoplasticElastomer, TPE, ExxonMobil, Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES, Santoprene

General Information
Product Description
IOTEK 3110 is a sodium ionomer which offers: - good mechanical strength - excellent shrink - easy processability IOTEK 3110 is the resin of choice as repulsive layer in coextruded pallet shrink films. A typical layer thickness is 10 - 15 µm (0.39 - 0.59 mil). It can be coextruded directly with LDPE. For optimal adhesion to LDPE it is recommended to use an EVA with 5 to 10 % VA as interlayer. IOTEK 3110 shows excellent sealing behavior even at low temperatures. To improve processing, it is recommended to add a high level of natural silica as antiblock additive to the IOTEK 3110 layer in the form of a suitable masterbatch. PE based master-batches are not recommended as they can influence the sealing behavior of the film. Please contact your ExxonMobil representative for recommended masterbatch references. The rheological characteristics and thermal stability of IOTEK 3110 offer good flow properties in coextrusion with a.o. LDPE and EVA. Processing Conditions: To minimize corrosion risk, all exposed metal surfaces in the extruder and die should be made from corrosion resistant metals or nickel/chrome plated. IOTEK 3110 should be fed into the extruder after LDPE of a similar or higher melt index. Machines should always be completely purged with LDPE or a suitable cleaning compound before shutdown. Cation containing polymers pick up moisture from the atmosphere if exposed for prolonged periods. It is therefore recommended to reseal tightly the package after each production run. In case of outdoor use, sodium ionomers can suffer from premature UV degradation. Zinc ionomers, like IOTEK 4200, are preferred or proper UV stabilization packages should be added.
General
Material Status	Commercial: Active
Availability	Africa & Middle East Asia Pacific Europe
Test Standards Available	ASTM

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: Iotek Ionomers Iotek 3110 Repulsive Pallet Shrink, IotekIonomersIotek3110RepulsivePalletShrink, Iotek™ Ionomers , Iotek Ionomers, IotekIonomers, Iotek3110RepulsivePalletShrink, Iotek3110, 3110Repulsive, RepulsivePallet, Iotek3110Repulsive, PalletShrink, Iotek3110RepulsivePallet, 3110Iotek, IonomersIotek 3110 Repulsive Pallet Shrink, IonomersIotek3110RepulsivePalletShrink, Ionomers Iotek 3110 Repulsive Pallet Shrink, IonomersIotek, IonomersIotek3110, IonomersIotek3110Repulsive, IonomersIotek3110RepulsivePallet, Ionomers, Ethylene Acrylic Acid Copolymer, EthyleneAcrylicAcidCopolymer, EAA, Thermoplastic Elastomer, ThermoplasticElastomer, TPE, ExxonMobil, Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES, Santoprene

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

Iotek™ Ionomers Iotek 3110 Repulsive Pallet Shrink - ExxonMobil Chemical -