UDEL P-3500 - Solvay Advanced - Polysulfone Plastic

UDEL P-3500 by Solvay Advanced Polymers is a PSU (Polysulfone) plastic material.

UDEL P-3500 is a very high molecular weight grade of polysulfone well suited for fabrication either by solution or melt processes. Solution processing is used to prepare flat sheet and hollow-fiber membranes, coatings, and films. Melt processing techniques include extrusion, thermoforming, and blow molding.
Polysulfone is a tough, rigid, and transparent high-strength thermoplastic that is suitable for long-term use up to 300°F (149°C). It is resistant to oxidation and hydrolysis, and withstands prolonged exposure to high temperatures and repeated sterilization. UDEL P-3500 polysulfone is highly resistant to mineral acids, alkali, and salt solutions. Its resistance to detergents and hydrocarbon oils is also good. Contact with polar solvents such as ketones, chlorinated hydrocarbons, and aromatic hydrocarbons should be avoided as these types of chemical compounds can cause stress cracking or solvate polysulfone resin.
Polysulfone is highly resistant to degradation by gamma or electron beam radiation but can be adversely affected by long term exposure to ultraviolet. Electrical properties of the polymer are very stable over a wide range of temperatures and after immersion in water or exposure to high humidity.
The resin is very safe for food contact uses. It complies with FDA 21 CFR 177.1655 and may be used in articles intended for repeated use in contact with foods. Additionally, it is approved by the NSF, by the Department of
Agriculture for contact with meat and poultry, and the 3-A Sanitary Standards of the Dairy Association.

The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.

This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), NSF (1). This is just a summary of complete data available in IDES' Prospector.

High Molecular Weight, High MW, High Rigidity, High Strength, Good Toughness, Tough, Good Starilizability, Sterilizable, Salt Water Spray Resistant, Salt Water Resistant, Salt Spray Resistant, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption, Good Electrical Properties, Detergent Resistant, Detergent Resistance, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation.

Piping, Pipe, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Appliance Components, Appliance Parts.

The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are:

UDEL P3500, UDELP3500, UDELŽ , UDEL, P3500, P:3500, P/3500, P+3500, P_3500, P 3500, P, Polysulfone, PSU, Solvay Advanced

Other Information for this Plastic
How to Access the Full Plastic Material Data Sheet for this Grade
The information presented on this page is just a summary for this plastic material. The full plastic data sheet containing additional general information, technical properties, and processing specifications is available from IDES. Click here to register for free access. After registering, you'll have immediate access to more than 77823 full plastic material data sheets from 698 global resin suppliers.
Agency Rating
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), NSF (1). This is just a summary of complete data available in IDES' Prospector.
Features (Alternate Representations)
High Molecular Weight, High MW, High Rigidity, High Strength, Good Toughness, Tough, Good Starilizability, Sterilizable, Salt Water Spray Resistant, Salt Water Resistant, Salt Spray Resistant, Moisture Resistant, Water Resistant, Low Moisture Absorption, Low Water Absorption, Good Electrical Properties, Detergent Resistant, Detergent Resistance, e-beam Sterilization, E-beam Sterilizable, electron beam, electron-beam, electron beam radiation, e-beam radiation.
Uses (Alternate Representations)
Piping, Pipe, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Appliance Components, Appliance Parts.
Spelling Variations
The terms listed below may be used to identify this product. They are provided to assist you in finding pertinent documentation from supplier and non-supplier sources. They are included for informational purposes only, and are typically NOT representations that have been specified by the supplier. Possible spelling variations for terms related to this product are: UDEL P3500, UDELP3500, UDELŽ , UDEL, P3500, P:3500, P/3500, P+3500, P_3500, P 3500, P, Polysulfone, PSU, Solvay Advanced

	Home Plastics Generics Manufacturers Distributors Store	Don't have an IDES account? Create an account now
	Tips

UDELŽ P-3500 - Solvay Advanced Polymers -