IDES Prospector Already have an account? Login Here

IDES

AD majoris CB 370

Polypropylene

Mineral Filler, 35%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CB 370 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CB 370 is a natural, 35% mineral filled polypropylene compound intended for injection moulding.

The product is available in natural (CB 370) and black (CB 370 - 8229) but other colours can be supplied on request.

CB 370 has been developed for applications where high density, good impact strength, good surface finish and good flow properties are necessary.

APPLICATIONS
High density products, such as :
  • Sound absorption parts
  • Electronic housings
  • Cosmetics mouldings
  • Appliances
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler, 35% Filler by Weight
Features 
  • Good Flow
  • Good Surface Finish
  • High Density
  • High Strength
  
Uses 
  • Acoustic Barrier
  • Appliances
  • Cosmetics
  • Electrical Housing
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (73°F)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CB 370, AD majoris , ADmajorisCB370, ADmajoris, majorisCB 370, majoris, majorisCB370, CB 370, CB370, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 370CB, 370majorisCB
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Density, High Specific Gravity, High Strength, Good Surface Finish, Good Flow.
Uses
Uses may also be described by the following terms: Electrical Housings, Electrical Housing.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.