IDES Prospector Already have an account? Login Here

IDES

AD majoris CFR 258 BLACK 8229

Polypropylene

Glass\Mineral, 20%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CFR 258 BLACK 8229 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CFR 258 BLACK 8229 is a low halogen flame retardant compound with glass/mineral reinforced UL 94 V2 intended for injection moulding. The product is available in natural (CFR 258) but other colours can be supplied on request.

CFR 258 BLACK 8229 produces very low level of toxicity and low smoke density in the case of a fire.

APPLICATIONS
CFR 258 BLACK 8229 is intended for the injection moulding for the automotive applications and electrical components.
  • Sockets
  • Electrical parts
  • Miscellaneous technical components
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass\Mineral, 20% Filler by Weight
Features 
  • Flame Retardant
  • Low Halogen Content
  • Low Smoke Emission
  • Low Toxicity
  
Uses 
  • Automotive Applications
  • Automotive Electronics
  • Electrical Parts
  • Electrical/Electronic Applications
  
Appearance 
  • Black
  • Colors Available
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break, 73°F, Injection Molded)
psi
 ISO 527-2/5
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/5
Flexural Modulus 2 (73°F, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-40°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Oxygen Index
%
 ISO 4589-2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CFR 258 BLACK 8229, AD majoris , ADmajorisCFR258BLACK8229, ADmajoris, majorisCFR 258 BLACK 8229, majorisCFR258, majoris, majorisCFR258BLACK8229, CFR 258 BLACK 8229, CFR258, 258BLACK, BLACK8229, CFR258BLACK8229, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, PolypropyleneUnspecified, PPUnspecified, 258CFR, 258majorisCFR
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Low Halogen Content, Low Toxicity, Low Smoke Emission.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 - 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.