GELOY FXTW26SK Resin SABIC IP Euro Acrylonitrile Styrene Acrylate

Product Description

Next generation Geloy XTW ASA for high heat exterior applications. Outstanding weatherability and toughness. Metallic sparkle VisualFx.

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Toughness

Good Weather Resistance

High Heat Resistance

Uses

Outdoor Applications

RoHS Compliance

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)		g/10 min	ASTM D1238
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)		in³/10min	ISO 1133
Molding Shrinkage			Internal Method
Flow: 0.126 in		in/in
Across Flow: 0.126 in		in/in
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
--²		psi	ASTM D638
--		psi	ISO 527-2/1
Tensile Strength
Yield³		psi	ASTM D638
Yield⁴		psi	ASTM D638
Yield		psi	ISO 527-2/50
Break³		psi	ASTM D638
Break⁴		psi	ASTM D638
Break		psi	ISO 527-2/50
Tensile Elongation
Yield³		%	ASTM D638
Yield⁴		%	ASTM D638
Yield		%	ISO 527-2/50
Break³		%	ASTM D638
Break⁴		%	ASTM D638
Break		%	ISO 527-2/50
Flexural Modulus
1.97 in Span⁵		psi	ASTM D790
--⁶		psi	ISO 178
Flexural Strength
--^6, 7		psi	ISO 178
Yield, 1.97 in Span⁵		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁸ (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact
-22°F		ft·lb/in	ASTM D256
73°F		ft·lb/in	ASTM D256
-22°F⁹		ft·lb/in²	ISO 180/1A
73°F⁹		ft·lb/in²	ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)		in·lb	ASTM D3763
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 0.126 in		°F	ASTM D648
264 psi, Unannealed, 2.52 in Span¹⁰		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ASTM D1525¹¹
--		°F	ISO 306/B50
--		°F	ISO 306/B120
CLTE
Flow: -40 to 104°F		in/in/°F	ASTM E831
Flow: -40 to 104°F		in/in/°F	ISO 11359-2
Transverse: -40 to 104°F		in/in/°F	ASTM E831, ISO 11359-2
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* FXTW26SK Resin, GELOY FXTW26SK Resin, GELOY* , GELOY, GELOYFXTW26SKResin, FXTW 26 SK Resin, FXTW26SK Resin, FXTW26, 26SK, SKResin, FXTW26SKResin, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylate, 26FXTW
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant, Good Toughness, Tough, High Heat Resistance.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Drying Time, Maximum		hr
Suggested Max Moisture		%
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm
Vent Depth		in

Notes

¹Typical properties: these are not to be construed as specifications.

²0.20 in/min

³Type I, 0.20 in/min

⁴Type I, 2.0 in/min

⁵0.051 in/min

⁶0.079 in/min

⁷Yield

⁸80*10*4 sp=62mm

⁹80*10*4

¹⁰80*10*4 mm

¹¹Rate B (120°C/h), Loading 2 (50 N)

GELOY* FXTW26SK Resin

Acrylonitrile Styrene Acrylate

Supplied by SABIC Innovative Plastics Europe