IDES Prospector Already have an account? Login Here

IDES

Tecodur PB70 GR20 BK002 CA

Polybutylene Terephthalate + PET

Glass Fiber Reinforcement, 20%

Supplied by Eurotec Engineering Plastics

The technical datasheet with complete property values for Tecodur PB70 GR20 BK002 CA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Additive 
  • Heat Stabilizer
  • UV Stabilizer
  
Features 
  • Good UV Resistance
  • Heat Stabilized
  
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature
°F
  
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0630 in
 
  
0.126 in
 
  
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Additional Information
Moisture Content, ISO 960: <0.1%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecodur PB70 GR20 BK002 CA, Tecodur , TecodurPB70GR20BK002CA, PB 70 GR 20 BK 002 CA, PB70 GR20 BK002 CA, PB70, 70GR, GR20, 20BK, BK002, 002CA, PB70GR20BK002CA, Polybutylene Terephthalate + PET, Polybutylene Terephthalate PET, Polybutylene Terephthalate : PET, Polybutylene Terephthalate / PET, Polybutylene Terephthalate - PET, Polybutylene Terephthalate _ PET, Polybutylene Terephthalate PET, PBT+PET, PBTPET, PBT:PET, PBT/PET, PBT-PET, PBT_PET, PBT PET, Polyester, Eurotec, PolybutyleneTerephthalatePET, PolybutyleneTerephthalate_PET, 70PB
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Holding Pressure
psi
  
Injection Notes
Back Pressure: Low
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.