Tecodur PB70 GR30 BK MD Eurotec Polybutylene Terephthalate (Glass Fiber Reinforcement, 30%)

General

Material Status

Availability

Filler / Reinforcement

Additive

Features

Appearance

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (270°C/2.16 kg)		g/10 min	ISO 1133
Water Absorption (Equilibrium, 73°F, 50% RH)		%	ISO 62
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/5
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/1A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Unnotched Izod Impact Strength			ISO 180/1U
-22°F		ft·lb/in²
73°F
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Melting Temperature		°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
Additional Information
Moisture Content, ISO 960: <0.1%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tecodur PB70 GR30 BK MD, Tecodur , TecodurPB70GR30BKMD, PB 70 GR 30 BK MD, PB70 GR30 BK MD, PB70, 70GR, GR30, 30BK, BKMD, PB70GR30BKMD, Polybutylene Terephthalate, PBT, Polyester, Eurotec, PolybutyleneTerephthalate, 70PB
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.

Notes

¹Typical properties: these are not to be construed as specifications.

Tecodur PB70 GR30 BK MD