IDES Prospector Already have an account? Login Here

IDES

Borealis PP BH374MO

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis PP BH374MO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BH374MO is a heterophasic copolymer. This grade is characterized by optimum combination of very high stiffness, good flow properties and good impact strength.

Products moulded with this grade exhibit excellent antistatic performance and very good mould release. This grade yields very good electrostatic charge half-time decay. Nucleation, good flow properties and high stiffness create a high potential for cycle time reduction.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Additive 
  • Antistatic
  • Nucleating Agent
  
Features 
  • Antistatic
  • Copolymer
  • Fast Molding Cycle
  • Good Mold Release
  • High Flow
  • High Impact Resistance
  • High Stiffness
  • Nucleated
  • Recyclable Material
Uses 
  • Containers
  • Pails
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BH374MO, Borealis PP , BorealisPPBH374MO, BorealisPP, PPBH 374 MO, PPBH374MO, PPBH374, PP, BH 374 MO, BH374MO, BH374, 374MO, Polypropylene Copolymer, PP Copolymer, Polypropylene, Borealis, PolypropyleneCopolymer, PPCopolymer, 374BH, 374PPBH
Features
Features may also be described by the following terms: High Impact Resistance, High Stiffness, High Flow, High Melt, High MFI, Good Mold Release, Easy Release, Good Demolding, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Holding Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded specimen
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.