IDES Prospector Already have an account? Login Here

IDES

AD majoris CETAL DG330

Acetal (POM) Copolymer

Glass Fiber Reinforcement, 30%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CETAL DG330 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CETAL DG330 is a 30 % glass fibre reinforced polyoxymethylen (POM), intended for injection moulding.

APPLICATIONS
The product is available in both natural but other colours can be provided on request.

CETAL DG330 has been developed especially for the automotive applications and electrical components.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Uses 
  • Automotive Applications
  • Electrical Parts
  
Appearance 
  • Colors Available
  • Natural Color
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2/1A/50
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Electrical
Nominal Value
Unit
Test Method
Electric Strength
V/mil
 IEC 60243-1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CETAL DG330, AD majoris CETAL DG330, AD majoris , ADmajorisCETALDG330, ADmajoris, majorisCETAL DG 330, majorisCETAL DG330, majorisCETAL DG330, majorisCETALDG, majoris, CETAL DG 330, majorisCETALDG330, CETAL DG330, CETAL DG330, CETALDG, DG330, CETALDG330, Acetal Copolymer, Acetal Copolymer, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, AcetalPOMCopolymer, DGCETAL, DGmajorisCETAL
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Back Pressure
psi
  
Injection Notes
Hold-on Pressure: egal injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.