IDES Prospector Already have an account? Login Here

IDES

AD majoris CP464W

Polypropylene Copolymer

Wood Fiber, 40%

Supplied by AD majoris

The technical datasheet with complete property values for AD majoris CP464W is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CP464W is a 40% wood fibre reinforced polypropylene compound intended for injection moulding.

CP464W has been developed especially for demanding applications in various engineering sectors. CP464W is UV stabilised.

APPLICATIONS
Product such as:
  • Boxes
  • Racks
  • Technical components
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Wood Fiber, 40% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Copolymer
  • Good UV Resistance
  
Uses 
  • Containers
  • Electrical/Electronic Applications
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (0.0787 in)
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/50
Tensile Strain (Break)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AD majoris CP464W, AD majoris , ADmajorisCP464W, ADmajoris, majorisCP 464 W, majorisCP464W, majorisCP464, majoris, CP 464 W, CP464W, CP464, 464W, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, PolypropyleneCopolymer, PPCopolymer, 464CP, 464majorisCP
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Hold-on Pressure: 50 to 70% of the injection pressure
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.