IDES Prospector Already have an account? Login Here

IDES

Texin® DP7-1097

Thermoplastic Polyurethane Elastomer

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Texin® DP7-1097 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
RoHS Compliance 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
     ASTM D790
-22°F
psi
  
73°F
psi
  
158°F
psi
  
Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel)
mg
 ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
50% Strain
psi
  
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength 2
lbf/in
 ASTM D624
Compression Set
     ASTM D395
73°F, 22.0 hr
%
  
158°F, 22.0 hr
%
  
Bayshore Resilience
%
 ASTM D2632
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 DSC
Vicat Softening Temperature
°F
 ASTM D1525
CLTE
     ASTM D696
Flow
in/in/°F
  
Transverse
in/in/°F
  
Additional Information
Compression Set, ASTM D395, 22 h at 73°F, Post-cured 16h at 230°F: 14%
Compression Set, ASTM D395, 22 h at 158°F, Post-cured 16h at 230°F: 30%
The value listed as Taber Abrasion Resistance, ASTM D1044, was tested in accordance with ASTM D3489.
Compressive Load, ASTM D575, 2% deflection: 44 lb/in²
Compressive Load, ASTM D575, 5% deflection: 158 lb/in²
Compressive Load, ASTM D575, 10% deflection: 332 lb/in²
Compressive Load, ASTM D575, 15% deflection: 497 lb/in²
Compressive Load, ASTM D575, 20% deflection: 663 lb/in²
Compressive Load, ASTM D575, 25% deflection: 839 lb/in²
Compressive Load, ASTM D575, 50% deflection: 2340 lb/in²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Texin® DP7-1097, Texin DP71097, Texin® , Texin, TexinDP71097, DP 7, DP 7 1097, DP7-1097, DP71097, DP7:1097, DP7/1097, DP7+1097, DP7_1097, DP7 1097, DP7, 71097, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Bayer, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 7DP
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.