IDES Prospector Already have an account? Login Here

IDES

Diamond ABS VP22

Acrylonitrile Butadiene Styrene

Supplied by Network Polymers, Inc.

The technical datasheet with complete property values for Diamond ABS VP22 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
Agency Ratings 
RoHS Compliance 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) 2
     ASTM D1238
200°C/5.0 kg
g/10 min
  
230°C/3.8 kg
g/10 min
  
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield)
psi
 ASTM D638
Flexural Modulus - Tangent 4
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.125 in
°F
  
264 psi, Annealed, 0.125 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 5
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, ALL
 
  
0.118 in, ALL
 
  
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Diamond ABS VP22, Diamond ABS , DiamondABSVP22, DiamondABS, ABSVP 22, ABSVP22, ABS, VP 22, VP22, Acrylonitrile Butadiene Styrene, Network Poly, AcrylonitrileButadieneStyrene, 22VP, 22ABSVP
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Procedure A
32.0 in/min
40.050 in/min
5Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.