IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® 2321FS

Low Density Polyethylene

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® 2321FS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
  • Antioxidant
  • Antistatic
  • Slip
 
Features 
  • Antiblocking
  • Antioxidant
  • Antistatic
  • Food Contact Acceptable
  • Opticals
  • Slip
Uses 
  • Film
  • Laminates
  • Non-specific Food Applications
  • Textile Applications
  • Thin-walled Packaging
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Strength
    ISO 527-3
MD: 1.6 mil
psi
 
TD: 1.6 mil
psi
 
Tensile Elongation
    ISO 527-3
MD: Break, 1.6 mil
%
 
TD: Break, 1.6 mil
%
 
Dart Drop Impact
g
ISO 7765-1
Elmendorf Tear Strength
    ISO 6383-2
MD: 1.6 mil
lbf
 
TD: 1.6 mil
lbf
 
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306
Optical
Nominal Value
Unit
Test Method
Gloss (1.57 mil)
 
ASTM D2457
Transmittance (1.57 mil)
%
ASTM D1003
Additional Information
Coefficient of Friction, ISO 8295, dynamic, 40µ: 0.1
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® 2321FS, ALCUDIA 2321FS, ALCUDIA® , ALCUDIA, ALCUDIA2321FS, 2321 FS, 2321FS, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Repsol YPF, PolyethyleneLowDensity, FS2321
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip.
Uses
Uses may also be described by the following terms: Thin-walled Packaging, Thin-wall Packaging, Thinwall Packaging, Food Applications.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.