ALCUDIA 2605F Repsol YPF Polyethylene, Low Density

General

Material Status

Availability

Additive

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Tensile Strength			ISO 527-3
MD: 1.6 mil		psi
TD: 1.6 mil		psi
Tensile Elongation			ISO 527-3
MD: Break, 1.6 mil		%
TD: Break, 1.6 mil		%
Dart Drop Impact (1.6 mil)		g	ISO 7765-1
Elmendorf Tear Strength			ISO 6383-2
MD: 1.6 mil		lbf
TD: 1.6 mil		lbf
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A
Optical	Nominal Value	Unit	Test Method
Gloss (1.57 mil)			ASTM D2457
Transmittance (1.57 mil)		%	ASTM D1003
Additional Information
Coefficient of Friction, ISO 8295, dynamic, 40µ: 0.5
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® 2605F, ALCUDIA 2605F, ALCUDIA® , ALCUDIA, ALCUDIA2605F, 2605 F, 2605F, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Repsol YPF, PolyethyleneLowDensity, F2605
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Release Film.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

ALCUDIA® 2605F