IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® CA-1421B

Ethylene Butyl Acrylate Copolymer

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® CA-1421B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
  • Unspecified Stabilizer
  
Features 
  • Antioxidant
  • Good Mold Release
  • Good Stability
Uses 
  • Film
  • Tubing
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-3
MD: Yield, 3.0 mil
psi
  
TD: Yield, 3.0 mil
psi
  
MD: 3.0 mil
psi
  
TD: 3.0 mil
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 3.0 mil
%
  
TD: Break, 3.0 mil
%
  
Dart Drop Impact (3.0 mil)
g
 ISO 7765-1
Elmendorf Tear Strength
     ISO 6383-2
MD: 3.0 mil
lbf
  
TD: 3.0 mil
lbf
  
Optical
Nominal Value
Unit
Test Method
Transmittance (2.95 mil)
%
 ASTM D1003
Additional Information
Absorption, EN 13206: 66%
Total Transmission of Visible Light, ISO 13468-2: 93%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® CA-1421B, ALCUDIA CA1421B, ALCUDIA® , ALCUDIA, ALCUDIACA1421B, CA, CA 1421 B, CA-1421B, CA1421B, CA:1421B, CA/1421B, CA+1421B, CA_1421B, CA 1421B, CA1421, 1421B, Ethylene Butyl Acrylate Copolymer, EBA, Thermoplastic Elastomer, TPE, Repsol YPF, EthyleneButylAcrylateCopolymer, ThermoplasticElastomer, 1421CA
Features
Features may also be described by the following terms: Good Stability, Good Mold Release, Easy Release, Good Demolding.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.