IDES Prospector Already have an account? Login Here

IDES

Styrolux® 3G46

Styrene Butadiene Styrene Block Copolymer

Supplied by Styrolution

The technical datasheet with complete property values for Styrolux® 3G46 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Styrolux 3G46 is a thermoplastic styrene-butadiene block copolymer which is suitable for injection molding, extrusion and thermoforming. It offers an outstanding combination of crystal clarity and good toughness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Food Contact Acceptable
  • Good Toughness
  • High Clarity
RoHS Compliance 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Extrusion
  • Injection Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (Saturation, 73°F)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2 (73°F)
psi
 ASTM D638
Tensile Strength 2 (Yield, 73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Instrumented Dart Impact (Total Energy)
in·lb
 ASTM D3763
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 3
CLTE - Transverse
in/in/°F
 ASTM E831
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Constant (0.0394 in, 1 MHz)
 
 ASTM D150
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 ASTM D542
Transmittance
%
 ASTM D1003
Haze (1.00 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Styrolux® 3G46, Styrolux 3G46, Styrolux® , Styrolux, Styrolux3G46, 3 G 46, 3G46, 3G, G46, Styrene Butadiene Styrene Block Copolymer, SBS, Thermoplastic Elastomer, TPE, Styrolution, StyreneButadieneStyreneBlockCopolymer, ThermoplasticElastomer, G3
Features
Features may also be described by the following terms: Good Toughness, Tough, High Clarity.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Rate B (120°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.