IDES Prospector Already have an account? Login Here

IDES

Ultramid® B 33 L

Polyamide 6

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® B 33 L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid® B33 L is a lubricated polyamide 6 grade of intermediate viscosity that is well suited for the production of biaxial oriented and cast film and monofilaments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Lubricant (500 ppm)
Features 
  • Lubricated
  • Medium Viscosity
  • Oil Resistant
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Film
  • Monofilaments
  
Agency Ratings 
 
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number (H2SO4 (Sulphuric Acid))
cm³/g
 ISO 307
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Density, ISO 1183: 1.12 to 1.15 g/cm³
Extractables, ISO 6427, chips not ground/16h: 0.5%
Film Grade, BASF Method: 1 to 3 mm²/kg
Lubricant, BASF Method: 350 to 650 mg/kg
Moisture Content, ISO 15512: 0.06%
Pellet Shape: Round
Pellet Size: 2 to 2.5 mm
Relative Viscosity, 1% (m/v) in 96% (m/m) sulfuric acid, ISO 307: 3.19 to 3.41
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 33 L, Ultramid B 33 L, Ultramid® B , Ultramid B, UltramidB33L, UltramidB, B 33 L, B33 L, B33, B33L, 33 L, 33L, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, L33, 33B
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Medium Viscosity.
Uses
Uses may also be described by the following terms: Cast Film, Monofilaments, Monofilament, Bi-axially Oriented Film, Biaxially Oriented Film.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.