IDES Prospector Already have an account? Login Here

IDES

Ultramid® B 27 E

Polyamide 6

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® B 27 E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid® B27 E is a polyamide 6 grade of low viscosity that is well suited for compounding and the production of monofilaments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Low Viscosity
  • Oil Resistant
  
Uses 
  • Compounding
  • Monofilaments
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Viscosity Number (H2SO4 (Sulphuric Acid))
cm³/g
 ISO 307
Moisture Content
%
 ISO 15512
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Nominal Value
Unit
Test Method
Extractables 2
%
 ISO 6427
Pellet Shape
 
  
Pellet Size
mil
  
Relative Viscosity 3
 
 ISO 307
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 27 E, Ultramid B 27 E, Ultramid® B , Ultramid B, UltramidB27E, UltramidB, B 27 E, B27 E, B27, B27E, 27 E, 27E, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, E27, 27B
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Viscosity.
Uses
Uses may also be described by the following terms: Compounding, Compounds, Monofilaments, Monofilament.
Notes
1Typical properties: these are not to be construed as specifications.
2Chips not ground, 16 hr
31% (m/v) in 96% (m/m) sulfuric acid
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.