Already have an account? Login Here

IDES

Vision® PPC BL 10004

Polypropylene Copolymer

Supplied by AKG Polymers B.V.

The technical datasheet with complete property values for Vision® PPC BL 10004 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Europe
Features	High Flow
Uses	Fibers
Appearance	Black
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Additional Information
Ash Content, Internal: <6% Non virgin polymer content, Internal: >95% Falling Weigth Impact Strength, Internal, 23°C: >30 kgcm Melt Mass - Flow Rate (MFR), ISO 1133, 230°C/ 2.16 kg: 96 to 104 Density, Internal: 0.90 to 0.94 Charpy Notched Impact Strength, DIN 53453: >4.8 kJ/m² Flexural Modulus, ISO 178: >1000 MPa Hardness Shore D, Internal: 60 to 64
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vision® PPC BL 10004, Vision PPC BL 10004, Vision® , Vision, VisionPPCBL10004, PPC BL 10004, PPCBL, BL10004, PPCBL10004, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, AKG Polymers, PolypropyleneCopolymer, PPCopolymer, BLPPC
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.

Notes

¹Typical properties: these are not to be construed as specifications.