IDES Prospector Already have an account? Login Here

IDES

Hostacom 68F4-3

Polypropylene Homopolymer

Talc Filler, 30%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostacom 68F4-3 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostacom 68F4-3 fractional melt flow, 3,400 MPa flexural modulus, 30% talc-filled, blow molding and extrusion grade polypropylene homopolymer is designed for high strength, stiffness, impact resistance and processability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Latin America
  • North America
  
Filler / Reinforcement 
  • Talc Filler, 30% Filler by Weight
Features 
  • Good Impact Resistance
  • Good Melt Strength
  • Good Processability
  • Good Strength
  • High Stiffness
Uses 
  • Profiles
  • Reinforced Panels
  
Processing Method 
  • Extrusion Blow Molding
  • Injection Blow Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Yield, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostacom 68F4-3, Hostacom 68F43, Hostacom , Hostacom68F43, 68 F 4, 68F4, 68 F 4 3, 68F4-3, 68F43, 68F4:3, 68F4/3, 68F4+3, 68F4_3, 68F4 3, 68F, F4, 43, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, LyondellBasell, PolypropyleneHomopolymer, PPHomopolymer, F68
Features
Features may also be described by the following terms: Good Impact Resistance, Good Strength, Good Processability, Easy Processing, High Stiffness, Good Melt Strength.
Uses
Uses may also be described by the following terms: Reinforced Panels, Reinforced Panel.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.