IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 147

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 147 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE 147 Performance Polymer has been developed for sheet extrusion and thermoforming applications. It is designed for high throughput thermoforming processes where lower cycle times and dimensional stability are required. INSPIRE 147 offers good mechanical/optical performance with antistatic and organoleptic properties.

Applications:
  • Vending cups and dairy pots
  • Trays for biscuits, fruits and various food products
  • Blister packaging

Complies with:
  • European Commission Regulation (EU) No 10/2011
  • FDA, 21 CFR 177.1520(c) 1.1
  • Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature 2 (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature 2
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Haze (Injection Molded)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 147, INSPIRE 147, INSPIRE™ , INSPIRE, INSPIRE147, 147, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Injection Molded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.