IDES Prospector Already have an account? Login Here

IDES

INSPIRE™ 227

Polypropylene

Supplied by Braskem Europe GmbH

The technical datasheet with complete property values for INSPIRE™ 227 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
INSPIRE™ 227 Performance Polymer combines good processability with excellent stiffness and low gel content for the manufacturing of films for quality film extrusion applications.

Main Characteristics:
  • Excellent Stiffness
  • High temperature resistance
  • Low gel content
  • Good processability
  • Good optical properties

Complies with:
  • EU, No 10/2011
  • Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Puncture Energy (2.0 mil)
in·lb
 ASTM D5748
Film Puncture Force (2.0 mil)
lbf
 ASTM D5748
Secant Modulus
     ASTM D882
2% Secant, MD: 2.0 mil
psi
  
2% Secant, TD: 2.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 2.0 mil
psi
  
TD: Yield, 2.0 mil
psi
  
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Dart Drop Impact (2.0 mil)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 2.0 mil
g
  
TD: 2.0 mil
g
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature (DSC)
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INSPIRE™ 227, INSPIRE 227, INSPIRE™ , INSPIRE, INSPIRE227, 227, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Braskem EU, PolypropyleneUnspecified, PPUnspecified
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Fabrication Conditions For Blown Film:
  • Die Gap: 1.0 mm
  • Melt Temperature: 230°C
  • Blow-Up Ratio: 2.5 to 1
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.