IDES Prospector Already have an account? Login Here

IDES

Vision® PPC BL1010 T20 HS

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by AKG Polymers B.V.

The technical datasheet with complete property values for Vision® PPC BL1010 T20 HS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Features 
  • High Impact Resistance
  • Low Temperature Heat Sealability
  
Uses 
  • Automotive Applications
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Additional Information
Melt Volume - Flow Rate (MVR), ISO 1133, 230°C/2.16 kg: 10 to 16 cm³/10min
Density, Internal: 1.03 to 1.07 g/cm³
The values listed for Charpy Impact Strength ISO179, were tested in accordance with DIN 53453.
Charpy Notched Impact Strength, DIN 53453, 23°C: >10 kJ/m²
Falling Weight Impact Strength, Internal, 23°C: >100 kgcm
Flexural Modulus, ISO 178: >1800 MPa
Hardness Shore D, Internal: 61 to 65
Non virgin polymer content, Internal: 75%
Talc Filler Content: 18 to 22%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vision® PPC BL1010 T20 HS, Vision PPC BL1010 T20 HS, Vision® , Vision, VisionPPCBL1010T20HS, PPC BL 1010 T 20 HS, PPC BL1010 T20 HS, PPCBL, BL1010, 1010T, T20, 20HS, PPCBL1010T20HS, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, AKG Polymers, PolypropyleneHomopolymer, PPHomopolymer, BLPPC
Features
Features may also be described by the following terms: High Impact Resistance, Low Temperature Heat Sealability, Low Temperature Heat Seal.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.