IDES Prospector Already have an account? Login Here

IDES

Xiran® SG224

Styrene Maleic Anhydride

Glass Fiber Reinforcement, 12%

Supplied by Polyscope Polymers BV

The technical datasheet with complete property values for Xiran® SG224 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Xiran® SG materials are SMA based injection moulding compounds with high heat resistance, particularly suitable for painted or foamed parts.
SG224 is a 12% glass reinforced grade with high modulus and good flow properties. Especially recommended for automotive applications where high flow and impact properties are required. The material is also available in natural colour (SG224N).
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 12% Filler by Weight
Additive 
  • Impact Modifier
Features 
  • Foamable
  • Good Impact Resistance
  • High Flow
  • High Heat Resistance
  • Impact Modified
  • Paintable
Uses 
  • Automotive Applications
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (240°C/10.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (24 hr)
%
  
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ASTM D570
Spiral Flow Length (78.7 mil)
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2/5
Tensile Stress (Break, Injection Molded)
psi
 ISO 527-2/5
Tensile Strain (Break, Injection Molded)
%
 ISO 527-2/5
Flexural Modulus 2, 3 (Injection Molded)
psi
 ISO 178
Flexural Strength 2, 3 (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-40°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-40°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/A
-40°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Annealed
°F
 ISO 75-2/B
264 psi, Annealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
CLTE - Flow (-4 to 176°F)
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Xiran® SG224, Xiran SG224, Xiran® , Xiran, XiranSG224, SG 224, SG224, Styrene Maleic Anhydride, SMA, smah, Polyscope, StyreneMaleicAnhydride, 224SG
Features
Features may also be described by the following terms: High Heat Resistance, High Flow, High Melt, High MFI, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Screw L/D Ratio
 
  
Screw Compression Ratio
 
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
33 point bending.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.