IDES Prospector Already have an account? Login Here

IDES

Lupolen 2423F

Low Density Polyethylene

Silica Filler, 0.14%

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Lupolen 2423F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Lupolen 2423 F is a low density Polyethylene. It is delivered in pellet form. It contains anti blocking agent.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Filler / Reinforcement 
  • Silica Filler, 0.14% Filler by Weight
Additive 
  • Antiblock
Features 
  • Antiblocking
  • Good Heat Seal
  • Good Processability
  • Opticals
  
Uses 
  • Bags
  • Film
  • Food Packaging
  • Protective Coatings
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Coefficient of Friction
 
 ISO 8295
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Strength
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 49/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Additional Information
Nominal Value
Unit
Test Method
Failure Energy (2.0 in)
ft·lb/in
 DIN 53373
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Lupolen 2423F, Lupolen , Lupolen2423F, 2423 F, 2423F, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, LyondellBasell, PolyethyleneLowDensity, F2423
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Good Heat Seal, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Food Packaging, Protective Coatings, Protective Coating.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.